2BIB — Be in Balance
Tracking & Tech

How to Calculate Calories in Homemade Food (Step by Step)

Home cooking has no label, which is why it gets logged badly or not at all. Here is the four-step recipe method, a worked example, and the shortcuts that keep it to five minutes.

7 min readBy the 2BIB team

Key takeaways

  • To calculate calories in homemade food, add up every raw ingredient, then divide the total by the cooked weight in grams to get calories per gram.
  • Cooking changes weight, not calories: white rice goes from about 365 kcal per 100 g dry to 130 kcal per 100 g cooked because it absorbs water.
  • Cooking fat is the usual gap. One tablespoon of olive oil is about 120 kcal, and it is invisible in the finished dish.
  • Dividing a pot into equal servings works when portions really are equal; weighing your own bowl is more accurate when they are not.
  • Do the calculation once per recipe and save the result. After that, a home-cooked meal logs as fast as a packaged one.

To calculate the calories in homemade food, add up the calories of every raw ingredient that goes into the pot, weigh the finished dish, and divide: total calories ÷ cooked weight in grams gives calories per gram. Multiply that by the weight of your portion. It takes about five minutes the first time you make a recipe, and nothing after that if you save the result.

How do you calculate the calories in a homemade meal?

You calculate the calories in a homemade meal in four steps: total the raw ingredients, weigh the cooked dish, divide to get calories per gram, and multiply by your portion weight. Only the first step takes real effort, and packaging labels do most of it.

  1. 1Total the ingredients. Weigh or read off the amount of each ingredient as it goes in, raw, and add up the calories. Include cooking oil, butter, sugar, cream and cheese. Skip water, salt, herbs and spices.
  2. 2Weigh the cooked dish. Weigh the full pot and subtract the weight of the empty pot, or tip the food into a bowl on a tared scale.
  3. 3Divide. Total calories ÷ cooked weight in grams = calories per gram.
  4. 4Multiply by your portion. Weigh what goes on your plate and multiply by the calories-per-gram figure.

The same division works for protein, carbohydrate and fat, so one pass gives you the macros as well. If you have not set targets yet, the macro calculator will give you numbers to log against.

What does the calculation look like for a real recipe?

For a simple beef chili, the ingredients below total about 1,440 kcal, and a finished pot weighing 1,200 g works out to 1.2 kcal per gram, so a 300 g bowl is about 360 kcal. The values are illustrative; use the labels on your own ingredients.

Ingredient (raw)AmountApprox. calories
90% lean ground beef500 g880 kcal
Kidney beans, canned, drained240 g300 kcal
Olive oil1 tbsp (13.5 g)120 kcal
Chopped tomatoes, canned400 g80 kcal
Onion150 g60 kcal
Total1,440 kcal

Approximate values based on USDA FoodData Central. Cooked pot weight in this example: 1,200 g, giving 1,440 / 1,200 = 1.2 kcal per gram.

1,440 kcal

Whole pot

sum of raw ingredients

1.2 kcal/g

Cooked density

1,440 kcal / 1,200 g

360 kcal

A 300 g bowl

or one of four equal servings

Notice the oil. One tablespoon is 8% of the pot's calories and adds nothing you can see. Leaving cooking fat out is the most common reason home-cooked meals are logged too low; it leads the list in calorie tracking mistakes.

Should you weigh food raw or cooked?

Weigh ingredients raw when you are building a recipe, and weigh your portion cooked when you serve it. What matters is that the weight matches the database entry you use: logging cooked rice against a raw-rice entry nearly triples the calories, and the reverse cuts them to about a third.

FoodRaw or dry, per 100 gCooked, per 100 gWhy it changes
White rice365 kcal130 kcalAbsorbs water
Pasta370 kcal160 kcalAbsorbs water
Rolled oats (cooked in water)380 kcal70 kcalAbsorbs water
Chicken breast, skinless120 kcal165 kcalLoses water
Potato (baked)77 kcal93 kcalLoses water

Approximate values from USDA FoodData Central. Cooked figures vary with cooking time and method.

Cooking does not meaningfully add or remove calories by itself. It moves water in or out, which changes how many calories sit in each gram. That is why the recipe method uses raw totals and a cooked weight: the calories were fixed when the ingredients went in.

Save the recipe once, log it in a tap

In 2BIB you can save a home-cooked dish as a custom food with its calories and macros per serving, star it as a favourite, and log it in one tap next time. For a one-off meal, an AI photo scan gives a quick estimate.

Start free

How do you count cooking oil, butter and sauces?

Count all the oil or butter that goes into the pan unless you can see a measurable amount left behind. Olive oil is about 120 kcal per tablespoon and butter about 100 kcal, so two unlogged tablespoons across a day is 200–240 kcal, enough to erase a modest deficit.

  • Measure fat before it goes in. Put the bottle on the scale, tare it, pour, and read the negative number. It is quicker than a spoon.
  • Shallow frying and roasting: assume the food took up the fat. If a clear pool is left, subtract a rough estimate.
  • Deep frying cannot be measured this way at home. Use a database entry for the fried food instead.
  • Marinades and sauces: count what ends up on the food. If half the marinade is thrown away, log half.

Good enough is the goal

Home calculations are estimates. Labels are allowed a margin of error and produce varies. Being consistently within 10% or so is plenty to steer by, as long as the calorie-dense items (fats, nuts, cheese, sugar) are measured and not guessed.

What if you do not want to weigh every ingredient?

If you do not want to weigh every ingredient, weigh only the calorie-dense ones (oil, butter, meat, grains, cheese, nuts) and estimate the vegetables, which contribute few calories per gram. In the chili example, the onion and tomatoes are under 10% of the total, so a rough guess there barely moves the result.

  • Use the packaging. A 500 g pack of mince or a 400 g can needs no scale; scan the barcode and use the whole pack.
  • Divide by servings. If the pot is split into four equal portions, each is a quarter of the total. This is fine for batch cooking into identical containers.
  • Photo-scan one-off meals. An AI food scanner estimates a plated meal in seconds. It cannot see oil that has been absorbed, so add fat as a separate entry when you know it is there.
  • No scale at all? See how to track calories without a food scale for hand-size portions.

Which method to reach for depends on the meal. A recipe you cook weekly deserves the five-minute calculation; a one-off dinner at a friend's house does not. The trade-offs are laid out in the best way to log food.

How do you log a homemade meal you eat again and again?

To log a homemade meal you eat regularly, calculate it once, save it as a single entry with calories and macros per serving or per 100 g, and reuse that entry each time. Most households rotate through a small number of dinners, so a handful of saved recipes covers most home cooking.

Recalculate only when the recipe changes in a way that matters: a different cut of meat, more oil, or a new portion size. Swapping one vegetable for another does not justify redoing the sums. Once your home meals are logged reliably, the numbers are worth comparing against your target from the TDEE calculator.

The short version

Add up the raw ingredients, weigh the cooked dish, divide to get calories per gram, and multiply by your portion. Measure the fats, estimate the vegetables, match raw weights to raw entries and cooked to cooked, and save every recipe you will make again so the work is only done once.

Frequently asked questions

How do I calculate calories in homemade food?

Add up the calories of every raw ingredient, including cooking oil and butter. Weigh the finished dish, then divide total calories by the cooked weight in grams to get calories per gram. Multiply that figure by the weight of your portion. The same division gives protein, carbohydrate and fat.

Should I weigh my food raw or cooked?

Either works as long as the weight matches the database entry. Weigh ingredients raw when building a recipe and weigh your portion cooked when serving. Mixing them up causes large errors: white rice is about 365 calories per 100 g dry but only about 130 per 100 g cooked.

Does cooking food change its calories?

Cooking does not meaningfully add or remove calories by itself. It changes the water content, so the calories per gram change: rice and pasta absorb water and become less calorie-dense, while meat loses water and becomes more calorie-dense. Added fat, such as oil or butter, does add calories.

How do I count the cooking oil in a recipe?

Count all the oil that goes into the pan unless a clearly measurable amount is left behind. Olive oil is about 120 calories per tablespoon and butter about 100. Weighing the bottle before and after pouring is the quickest accurate method. For deep-fried food, use a database entry for the fried item.

How do I work out calories per serving for a recipe?

Divide the recipe's total calories by the number of servings, provided the servings are equal. A pot totalling 1,440 calories split into four equal portions gives 360 calories each. If portions differ, weigh your own and multiply by the dish's calories per gram instead.

Do I have to weigh every ingredient to track a homemade meal?

No. Weigh the calorie-dense ingredients, such as oil, butter, meat, grains, cheese and nuts, and estimate low-calorie vegetables, which barely change the total. Use whole-pack weights from the packaging where you can. Once a recipe is calculated, save it so you never have to repeat the work.

Stop doing the maths by hand.

2BIB scans your meals with AI, tracks calories, macros, water, and weight, and recalibrates your targets automatically as your body changes.

Start free — no card required